IMG exterior gel wood stains penetrate the wood and protect it from rotting, weathering, and UV rays, while producing excellent color uniformity.

The special non-drip gel formulation makes it possible to apply IMG vertically. Odorless and environmentally friendly, they can also be applied to surfaces in interiors, protected by an appropriate top coat.

Easy to apply by brush, spray or sponge. Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.

Window frames, shutters, fences, balconies and other wood items located outdoors, interior furnishings, beams and roofs.

USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.

USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.

ICA RECOMMENDS
- For improved outdoor protection and color stability, apply a top coat of our IMR, FNT or FND finishes. If used indoors, protect with our FFT or NATURWOOD finish.
- IMG00: For greater protection against UV rays, use the colored version of this product.
- IMG11: On woods that contain tannin, such as oak and chestnut, the color may be altered.

Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
VERNICI PER ESTERNO
MASSIMA PROTEZIONE

La soluzione ideale per chi cerca impregnanti, finiture, smalti e oli all’acqua di lunga durata, tutti i prodotti hanno superato test di laboratorio e di invecchiamento e offrono la massima protezione dalle intemperie e dai raggi UV.

  • Protezione professionale del legno.
  • Lunga durata.
  • Formulazione a base acqua inodore e atossica.
  • Facili da applicare.

EXTERIOR NON-DRIP UV WOOD STAIN

Colorazione: CLEAR
CLEAR
PINE
LARCH
OAK
CHESTNUT
TEAK
CHERRY
MAHOGANY
WALNUT
DARK WALNUT
GREEN
WHITE
FALUN RED
SANTORINI BLUE
Quantity available:
Where to buy
Acquista online su

IMG exterior gel wood stains penetrate the wood and protect it from rotting, weathering, and UV rays, while producing excellent color uniformity.

The special non-drip gel formulation makes it possible to apply IMG vertically. Odorless and environmentally friendly, they can also be applied to surfaces in interiors, protected by an appropriate top coat.

Easy to apply by brush, spray or sponge. Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.

Window frames, shutters, fences, balconies and other wood items located outdoors, interior furnishings, beams and roofs.

USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.

USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.

ICA RECOMMENDS
- For improved outdoor protection and color stability, apply a top coat of our IMR, FNT or FND finishes. If used indoors, protect with our FFT or NATURWOOD finish.
- IMG00: For greater protection against UV rays, use the colored version of this product.
- IMG11: On woods that contain tannin, such as oak and chestnut, the color may be altered.

Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
VERNICI PER ESTERNO
MASSIMA PROTEZIONE

La soluzione ideale per chi cerca impregnanti, finiture, smalti e oli all’acqua di lunga durata, tutti i prodotti hanno superato test di laboratorio e di invecchiamento e offrono la massima protezione dalle intemperie e dai raggi UV.

  • Protezione professionale del legno.
  • Lunga durata.
  • Formulazione a base acqua inodore e atossica.
  • Facili da applicare.
Guida alla scelta

How to create a wood effect on your wooden shed

Are you ready to enhance the natural surface of your wooden shed? The IMG series is the effective solution for total protection, even against UV rays. Organize all the space around the shed, preparing the necessary equipment and materials. We are ready to start!

Level of difficulty
Surface

New wood

Tools
Instructions
Step 1

Start by sanding the wooden shed... The more attention you put into this stage, the better the end result will be! Choose a 150/180 grit sandpaper and make sure to wipe off any dirt, residue and resin between one board and another with a dusting brush and a dry cotton or microfiber cloth.

Step 2

Now that you have removed all dust and impurities, the surface is ready to be coated. We suggest to use IMG - no-drop water-based impregnating agent for wood, available in different colors, from neutral to dark walnut.

Step 3

During the application, be careful to move the paint brush in fluid movements, going with the grain and, most importantly, don't leave any uncovered areas. Out tip: when opening the can, mix the product well for at least one minute to reduce its high density. During the application you will notice that the product looks like a gel. This consistency prevents product dripping and guarantees a high performance, even close to knots. Leave to dry for 2 to 4 hours.

Step 4

Complete by applying the FNC transparent water-based topcoat for wood, allowing an interval of at least 2-4 hours between the first and the second coat.


More information
Thanks to the zero-waste edge technology of their packaging, which allows to use 100% of the product, ICA for You products are at your side. Do you have any doubts about which type of brush to choose? For the best application choose a large flat brush with synthetic bristles. IMG water-based impregnating agent is the ideal solution to obtain a natural and professional effect!

#icaforyou

Projects completed with this product
Mensole in abete. Ho usato ICA for you IMG01-0250 Impregnante Antigoccia all'acqua per legno (colorazione Rovere) e la finitura trasparente ICA for you FFT20-0075 (satinata). Risultato eccellente. #furnishings #new lease of life #color #brown #interior furniture #verniciare #legno #interior #painting #wood
Baracca
I used metallic water-based wood stain and sealer with wax finish for exteriors and interiors, ash gray IMV01-0075b, for a lounge area in wood board recovered from pallets. I spray-applied the product... the end result is great and the color is beautiful! #furnishings #garden furniture #exterior #metallic
magro67
Garden table maintenance with ICA for you coatings #teak #exterior #maintenance #table #chair #outdoor #maintenance #table #chiar #chair
Andrea8G
Garden table restoration with water-based impregnating agent for wood. # garden furniture#new lease of life #restoration #teak #maintenance #table #outdoor #garden furniture #new lease of life #restoration #teak #maintenance #table #exterior #garden-furniture #new-lease-of-life #restoration #maintenance #outdoor #table
Rink9
Guide to choosing
Guide to choosing
Find your product
Sign up for the ICA for you newsletter
Stay up-to-date on the latest product news and the world of DIY.
for you