METALLIX metallic exterior UV wood finishes offer extremely high protection for the wood over time.

The special formulation containing real metallic particles maximizes protection against sunlight and gives wood a sleek look.

Odorless and environmentally friendly. Easy to apply by brush or spray, directly onto untreated or pre-stained wood.

Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.

Window frames, shutters, fences, balconies and other wood items located outdoors, beams and roofs.

USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 1-2 hours, the second coat of product can be applied without sanding. After 2 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.

USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.

ICA RECOMMENDS
- For a better aesthetic effect, rusticate the raw wood with a brush with iron bristles. 

Pigmenti metallici
Water-based
UV resistant
Weather resistant
Water-repellent
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12h

METALLIX - METALLIC EXTERIOR UV WOOD FINISH

Colorazione: ASH GRAY
ASH GRAY
VIOLET RED
DARK GREEN
ALUMINUM WHITE
SHADOW GRAY
HAZELNUT BROWN
MAJORELLE BLUE
GOLDEN ORANGE
Quantity available:
Where to buy
Acquista online su

METALLIX metallic exterior UV wood finishes offer extremely high protection for the wood over time.

The special formulation containing real metallic particles maximizes protection against sunlight and gives wood a sleek look.

Odorless and environmentally friendly. Easy to apply by brush or spray, directly onto untreated or pre-stained wood.

Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.

Window frames, shutters, fences, balconies and other wood items located outdoors, beams and roofs.

USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 1-2 hours, the second coat of product can be applied without sanding. After 2 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.

USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.

ICA RECOMMENDS
- For a better aesthetic effect, rusticate the raw wood with a brush with iron bristles. 

Pigmenti metallici
Water-based
UV resistant
Weather resistant
Water-repellent
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12h
Pigmenti metallici
Water-based
UV resistant
Weather resistant
Water-repellent
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12h
Guida alla scelta

How to create a metallic effect on your wooden shed

Do you want to give a metallic effect to your wooden shed? Great choice! Follow this brief guide to get the most out of ICA's IMV series. The metallic pigments of these water-based impregnating agents will protect the surface against UV rays, besides giving it a more elegant look.

Level of difficulty
Surface

New wood

Tools
Instructions
Step 1

Start by sanding your wooden shed with a 150/180 grit sandpaper. Make sure to wipe off any dirt, residue and resin between one board and another with a dusting brush and a dry cotton or microfiber cloth. 

Step 2

Now you need to use the IMV impregnating agent! This product, available in different colors, from gray to brown, protects well the wood surface, penetrating into its pores. Our tip: when opening the can, mix the product well for at least one minute to reduce its high density.

Step 3

The application of the IMV wax-like metallic water-based impregnating agent is a key step. Follow the wood grains along the boards, paying special attention to hidden parts and intersections. Once applied the first coat, wait at least 1-2 hours before proceeding with the second coat.


More information
Thanks to the zero-waste edge technology of their packaging, which allows to use 100% of the product, ICA for You products are at your side. Do you have any doubts about which type of brush to choose? For the best application choose a large flat brush with synthetic bristles. IMV water-based impregnating agent is the ideal solution to obtain an aged and original effect!

#icaforyou

Projects completed with this product
I used metallic water-based wood stain and sealer with wax finish for exteriors and interiors, ash gray IMV01-0075b, for a lounge area in wood board recovered from pallets. I spray-applied the product... the end result is great and the color is beautiful! #furnishings #garden furniture #exterior #metallic
magro67
Wooden boat model painted with metallic impregnating agent #verniciare #coating #metallic #painting #metallic
Alessandra
Doors coated with ICA metal-effect wood preservative. #windows #shutters #outdoor #metallic #windows #shutters #windows #shutters #outdoor #metallic #exterior #metallic
ANDREA77
Guide to choosing
Guide to choosing
Find your product