FFT is a 2-in-1 varnish that serves as a sealer and finish for interior wood protection and enhancement. Odorless and environmentally friendly. Easy to apply by brush or spray.
Professional protection from scratches and stains. Washable with neutral detergents. The active metals boost durability and protect the coating film from bacterial growth. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Wood furniture and items for interiors (chairs, doors, tables, kitchen-cabinet doors, baseboards/skirting etc.).
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
- Apply a final third coat if necessary.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- On tables or horizontal surfaces, apply at least 3 coats.
- For a stained effect, FFT can be applied over a coat of IMG exterior wood stain.
No heavy metals
Stain resistant
Scratch resistant
Interior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12-24h
Le vernici all’acqua per interni valorizzano il legno e lo proteggono da graffi e macchie. La linea comprende vernici trasparenti e laccate che garantiscono alta qualità nelle finiture.
FFT is a 2-in-1 varnish that serves as a sealer and finish for interior wood protection and enhancement. Odorless and environmentally friendly. Easy to apply by brush or spray.
Professional protection from scratches and stains. Washable with neutral detergents. The active metals boost durability and protect the coating film from bacterial growth. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Wood furniture and items for interiors (chairs, doors, tables, kitchen-cabinet doors, baseboards/skirting etc.).
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
- Apply a final third coat if necessary.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- On tables or horizontal surfaces, apply at least 3 coats.
- For a stained effect, FFT can be applied over a coat of IMG exterior wood stain.
No heavy metals
Stain resistant
Scratch resistant
Interior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12-24h
No heavy metals
Stain resistant
Scratch resistant
Interior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Final drying 12-24h
Le vernici all’acqua per interni valorizzano il legno e lo proteggono da graffi e macchie. La linea comprende vernici trasparenti e laccate che garantiscono alta qualità nelle finiture.
