VPA high-traffic water-based polyurethane varnish protects wood floors against wear caused by usage, scratches, and stains. Odorless and environmentally friendly. Easy to apply by roller or brush.
The active metals boost durability and protect the coating film from bacterial growth. Washable with neutral detergents. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Wood flooring for interiors. Do not use on oiled or waxed floors.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply by roller (specific for water-based coatings).
- Leave to dry for at least 3 hours, then sand carefully with 220–320-grit sandpaper.
- Remove the sawdust and apply a second coat.
- Leave to dry for at least 16 hours.
- Sand with 280–320-grit sandpaper, remove the sawdust and then apply the final coat.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- Do not use on oiled or waxed floors.
- We suggest cleaning the surface using PULIWOOD or another neutral detergent for wood floors.
High-traffic
No heavy metals
Natural effect
Stain resistant
Interior use
Ready to use
Roller application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Can be walked on after 24h
Le vernici per parquet proteggono il legno da usura da calpestio, graffi e macchie. Grazie alla presenza di metalli attivi aumenta la durabilità e protegge il film di rivestimento dalla proliferazione batterica.
VPA high-traffic water-based polyurethane varnish protects wood floors against wear caused by usage, scratches, and stains. Odorless and environmentally friendly. Easy to apply by roller or brush.
The active metals boost durability and protect the coating film from bacterial growth. Washable with neutral detergents. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Wood flooring for interiors. Do not use on oiled or waxed floors.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply by roller (specific for water-based coatings).
- Leave to dry for at least 3 hours, then sand carefully with 220–320-grit sandpaper.
- Remove the sawdust and apply a second coat.
- Leave to dry for at least 16 hours.
- Sand with 280–320-grit sandpaper, remove the sawdust and then apply the final coat.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- Do not use on oiled or waxed floors.
- We suggest cleaning the surface using PULIWOOD or another neutral detergent for wood floors.
High-traffic
No heavy metals
Natural effect
Stain resistant
Interior use
Ready to use
Roller application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Can be walked on after 24h
High-traffic
No heavy metals
Natural effect
Stain resistant
Interior use
Ready to use
Roller application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Can be walked on after 24h
Le vernici per parquet proteggono il legno da usura da calpestio, graffi e macchie. Grazie alla presenza di metalli attivi aumenta la durabilità e protegge il film di rivestimento dalla proliferazione batterica.
