IMG exterior gel wood stains penetrate the wood and protect it from rotting, weathering, and UV rays, while producing excellent color uniformity.
The special non-drip gel formulation makes it possible to apply IMG vertically. Odorless and environmentally friendly, they can also be applied to surfaces in interiors, protected by an appropriate top coat.
Easy to apply by brush, spray or sponge. Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.
Window frames, shutters, fences, balconies and other wood items located outdoors, interior furnishings, beams and roofs.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- For improved outdoor protection and color stability, apply a top coat of our IMR, FNT or FND finishes. If used indoors, protect with our FFT or NATURWOOD finish.
- IMG00: For greater protection against UV rays, use the colored version of this product.
- IMG11: On woods that contain tannin, such as oak and chestnut, the color may be altered.
Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
La soluzione ideale per chi cerca impregnanti, finiture, smalti e oli all’acqua di lunga durata, tutti i prodotti hanno superato test di laboratorio e di invecchiamento e offrono la massima protezione dalle intemperie e dai raggi UV.
IMG exterior gel wood stains penetrate the wood and protect it from rotting, weathering, and UV rays, while producing excellent color uniformity.
The special non-drip gel formulation makes it possible to apply IMG vertically. Odorless and environmentally friendly, they can also be applied to surfaces in interiors, protected by an appropriate top coat.
Easy to apply by brush, spray or sponge. Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.
Window frames, shutters, fences, balconies and other wood items located outdoors, interior furnishings, beams and roofs.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- For improved outdoor protection and color stability, apply a top coat of our IMR, FNT or FND finishes. If used indoors, protect with our FFT or NATURWOOD finish.
- IMG00: For greater protection against UV rays, use the colored version of this product.
- IMG11: On woods that contain tannin, such as oak and chestnut, the color may be altered.
Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
Weather resistant
Final drying 4-6h
Water-based
No-drip
UV resistant
Interior and exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 10-12 m2/L per coat
La soluzione ideale per chi cerca impregnanti, finiture, smalti e oli all’acqua di lunga durata, tutti i prodotti hanno superato test di laboratorio e di invecchiamento e offrono la massima protezione dalle intemperie e dai raggi UV.
Are you ready to enhance the natural surface of your wooden shed? The IMG series is the effective solution for total protection, even against UV rays. Organize all the space around the shed, preparing the necessary equipment and materials. We are ready to start!
New wood
